Skip to main content


Simple cable rim brakes saving my ass as always (at least until the front disc caliper is fixed on my other bike). :P

#cycling #bicycle #mastobikes #biketooter


Today in tk's #seabikes adventures: descending from Phinney Ridge without a functioning front brake. 😱

(The bike has TRP Hylex hydraulic disc brakes. I took it to my LBS after and they said that it looks like the caliper might've sprung a leak and has been contaminating the rotor. I've had the brakes for several years now, so I'm not too bothered.)

#cycling #bicycle #mastobikes #biketooter


Neil E. Hodges reshared this.

in reply to Neil E. Hodges

Yes, cantis. I like them. 🤷 They work well when set up correctly: straddle as low as you can get them to start, then raise little by little if you prefer. Having a lower cable hanger will additionally reduce system flex and improve stopping.

Even those dreaded Tektro "Oryx" 992A calipers. You need the straddle super low, but they work great that way. (That does also mean that they have limited tire clearance!)

(Oh, and this isn't a "rim versus disc" debate starter. If anything, it would be a "cantis suck" debate. :P )

#cycling #bicycle #mastobikes #biketooter

in reply to 😀🚲

@enobacon U Brakes are once again resurrected as “braze on centerpulls”. I have some on my old Centurion ProTour.
Love the Tektro CR720 cantis, sadly discontinued it appears. Luckily I have a backstock.
in reply to Neil E. Hodges

Is there a bit of fraying going on there? Or is that normal? (honest question, I'm just getting into servicing my own bicycles...)
in reply to AI6YR Ben

The cable yoke deformed as I tightened the set screw even though I didn't wrench on it very hard at all. :(
in reply to Neil E. Hodges

I never bother with the set screw for the straddle-cable. I just remove it altogether or use a yoke that doesn’t have one.
This entry was edited (1 week ago)
in reply to Nate

I'm planning on replacing it with a yoke that doesn't have those set screws. 👍