Maybe there are some strict rules for the construction project or maybe they just want to keep tabs on things. I have seen those only once or twice, in big cities. They never seem to be permanent, because after a while they disappear again. But I am half a globe away, so...
Having to frequently apply eye ointment when you have long eyelashes and wear glasses is suffering. Constantly dirty glasses no matter how much you clean them! :(
sorry I misread. meshcore-open is a phone app that allows you to configure repeaters remotely. Which they make you pay for in the proprietary app or place arbitrary restrictions on if you don’t pay. there is a an open source alternative to ripple OS on T deck called aurora but I don’t think it includes remote config of repeaters. If you want to remotely manage repeaters without shelling out maybe use the phone app for that side of things. It would be a good feat to add to aurora though
I can't for the life of me get this stupid Heltec V4 #MeshCore repeater to connect over serial. I'm trying to reconfigure it (I can't use the Web flasher, devs! >:( ), but I can't get into it at all because it defaults to the EU band and I'm in the US. How do I get the thing to respond?
have you tried holding the upper (user) button pressed in while pushing the lower (reset) button? When the PCB is oriented with the buttons on the left side. That should put an ESP based device in a flashable mode.
Thanks, but the issue is that I can't get to the point where it's accepting commands. Serial doesn't connect at all over USB, but I'm able to flash the firmware just fine. :(
also.. thinking out loud.. why are you putting the -r ? .. it's not in any of my command lists.. and try a few different baud rates maybe? .. that is zero not an "O" isn't it (spent n hour mashing my head against a wall one day over that)
mostly I deal with crap like scrapped Cisco routers etc.. so these things are unfamiliar to me.. it's connected by a usb>serial?.. shouldn't it be dev/USBxx then??
All I know is that /dev/ACM0 shows up when I plug it in, and flashing worked when I pointed esptool at it.
[ 2134.200736] usb 1-10: new full-speed USB device number 13 using xhci_hcd
[ 2134.454250] usb 1-10: New USB device found, idVendor=10c4, idProduct=ea60, bcdDevice= 1.00
[ 2134.454254] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2134.454257] usb 1-10: Product: CP2102 USB to UART Bridge Controller
[ 2134.454259] usb 1-10: Manufacturer: Silicon Labs
[ 2134.454261] usb 1-10: SerialNumber: 0001
[ 2134.482271] cp210x 1-10:1.0: cp210x converter detected
[ 2134.488259] usb 1-10: cp210x converter now attached to ttyUSB0
[ 7194.421598] usb 3-2.4.3: new full-speed USB device number 11 using xhci_hcd
[ 7194.542171] usb 3-2.4.3: New USB device found, idVendor=303a, idProduct=0002, bcdDevice= 1.00
[ 7194.542176] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7194.542178] usb 3-2.4.3: Product: heltec_wifi_lora_32 v4 (16 MB FLASH, 2 MB PSRAM)
[ 7194.542181] usb 3-2.4.3: Manufacturer: Espressif Systems
[ 7194.542183] usb 3-2.4.3: SerialNumber: B0A604C675F4
[ 7194.613215] cdc_acm 3-2.4.3:1.0: ttyACM0: USB ACM device
@enot `-r` should work, it has been contributed by Bram Mittendorff, but it's not raw serial, it interprets (a little) and adds line editing, completion and history
But for testing purposes, I would remove this layer and use a raw terminal (`picocom -b 115200 /dev/ttyACM0`) should work
A year after Donald Trump’s return to the White House, a global survey suggests much of the world believes his nation-first, “Make America Great Again” approach is instead helping to make China great again.
The 21-country survey for the influential European Council on Foreign Relations (ECFR) thinktank also found that under Trump, the US is less feared by its traditional adversaries, while its allies – particularly in Europe – feel ever more distant.
Most Europeans no longer see the US as a reliable ally and are increasingly supportive of rearmament, it found, while Russians now see the EU as more of an enemy than the US, and Ukrainians are looking more to Brussels than to Washington for support.
The poll, of nearly 26,000 respondents in 13 European countries, the US, China, India, Russia, Turkey, Brazil, South Africa and South Korea, found majorities in almost every territory surveyed expected China’s global influence to grow over the next decade.
These ranged from 83% in South Africa, 72% in Brazil and 63% in Turkey through 54% in the US, 53% in 10 EU states and 51% in India to 50% in the UK. Most EU citizens expected China to soon lead the world in electric vehicles and renewable energies.
Moreover, few seemed concerned about it. The polling found that only in Ukraine and South Korea did majorities view China as a rival or an adversary, while more people in South Africa, India and Brazil saw China as an ally than they did two years ago.
Greenland Official Breaks Down in Tears on Live TV After White House Meeting Failed to Stop Trump's Threats: 'I Am Overwhelmed'
A new poll shows that only 17% of Americans approve of President Donald Trump's efforts to acquire Greenland, a self-governing NATO territory in the Kingdom of Denmark
Greenland Foreign Minister Vivian Motzfeldt got emotional during an interview after an unproductive White House meeting with JD Vance and Marco Rubio on Jan.
I saw them zip by while I was taking photos of the Yakima River Canyon, and one of them said he saw me getting photos at the Clear Creek Falls Overlook. He told me they were taking a break from the crazy and gusty wind.
Rev. caffinepwrd ☕
in reply to Neil E. Hodges • • •Neil E. Hodges
in reply to Rev. caffinepwrd ☕ • •